Nanolex Wheel Cleaner & Iron Remover is a powerful and extremely fast acting wheel cleaner that offers a safe alternative to the overly harsh wheel cleaners typically found on the high street. In almost all cases a single application will enable moderate to heavy accumulations of brake dust and grime to be fully removed, leaving your wheels and tyres looking like new. In order to deliver maximum efficiency and performance, Nanolex Wheel Cleaner & Iron Remover comprises a viscous gel, meaning that it stays exactly where you spray it, rather than running off on to the floor. You simply spray it on, leave it to dwell for 2-3 minutes and rinse it off. Job done!
Nanolex Wheel Cleaner & Iron Remover is an intensive cleaner designed to dissolve brake dust and other iron-rich contaminants upon contact. It achieves this using a neutralised acid salt, which reduces iron particles into a soluble form, making them easy to rinse off with water. As a result, Nanolex Wheel Cleaner & Iron Remover is safer and less aggressive than traditional acid-based wheel cleaners, but equally as effective in terms of cleaning power. As you might expect, its highly efficient non-aggressive formula is safe for all wheel types (including polished metal, chrome plated and anodised rims) and regular use will ensure that your rims stay looking like new.
Nanolex Wheel Cleaner & Iron Remover comes pre-diluted to the correct strength for safe use on all wheel types, and should thus be used neat. For best results, we recommend that it is sprayed on liberally and then left to dwell for 2-3 minutes; during this interval the initially transparent gel will rapidly turn burgundy as ferrous compounds and sintered iron particles dissolve into solution (this effect can be very pronounced, but don't panic because it's quite normal and to be expected). Although Nanolex Wheel Cleaner & Iron Remover is essentially a touchless cleaner, you may agitate it using suitable brushes and/or a microfibre wash mitt if you wish (ideal choices include EZ Detail Wheel Brushes, PB Luxury Wheel Woolies and the Meguiar's Microfibre Wash Mitt). After 2-3 minutes rinse the cleaner off thoroughly with a stream of water and dry your wheels off in the normal way. Note that if the burgundy residue has started to dry out you may need to use a stronger jet of water from a pressure washer in order to remove it fully.
|Strips sealants and waxes:|| (partially)|
|Removes inorganic contaminants:|
|Safe for all wheel types:|