Ahead of the 2016 Formula 1 season, Nanolex were contacted by the Renault Sport Formula One Team, who were seeking advice about maintaining the satin finish on their new car. After visiting the factory and demonstrating several products, a decision was made to appoint Nanolex as an official team supplier. In addition to supplying existing products in the range for various tasks, Nanolex realised they needed to develop a brand new product for dry cleaning the car in the pits in between sessions. They quickly set to work, Nanolex Race Film Remover is the end result. Now you know what the Renault Sport Formula One Team use!
Nanolex Race Film Remover is a highly efficient cleaner and degreaser for race track related contamination, and evaporates cleanly without leaving any residue behind. Due to the powerful blend of solvents it comprises, it easily removes encrusted grease and oil, rubber marks, tar spots, sticky adhesive residues and carbon dust from ceramic braking systems. Nanolex Race Film Remover is free of halogenated hydrocarbons and aromatic solvents, and therefore poses a far lower health and safety risk than brake cleaners and other aggressive solvents, which are commonly used as general purpose cleaners by motorsports teams.
Nanolex Race Film Remover is an intensive solvent-based cleaner and should be used neat. For best results, it should be applied to dry surfaces (if conditions dictate it can be applied to wet surfaces, but note that its efficacy will be reduced). Working on one panel at a time, spray it on liberally and allow 1-2 minutes for it to work. Then take a PB Disposable Towel and wipe the panel down gently to remove any stubborn nibs of contamination. Once the whole car is done discard the towel (don't attempt to wash it, because the residual odour will contaminate your washing machine) and then reapply any protection.
|Strips sealants and waxes:|
|Removes organic contaminants:|
|Safe for all wheel types:|
|Cleaning strength:|| |