Menzerna Power Finish (RD3.02)

Heavily swirled ceramic nano-particle and scratch-resistant finishes can be quite difficult to correct, even if the paint defects don't appear to be very deep. Why? Because such paints are physically very hard, and normal abrasive polishes are rarely robust enough to cut them properly. Menzerna Power Finish (RD3.02) solves this problem by swapping out fragile aluminium oxide particles for robust precision-milled abrasives. These work normally on harder paints without prematurely breaking down, meaning that you’ll make progress in no time at all.

Menzerna Power Finish (RD3.02) is a cutting compound designed to remove moderate to severe paint defects, including swirl marks and light scratches. It's ideal for correction work on modern ceramic nano-particle and scratch-resistant clearcoats, and produces great results on harder conventional paint finishes too. It works by using robust, precision-milled abrasives to cut away a very thin layer of paint. Long lasting lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

You should only use Menzerna Power Finish (RD3.02) by machine. For best results using a dual action polisher, apply Menzerna Power Finish (RD3.02) with either a Menzerna 135 mm Compounding Pad or a Menzerna 135 mm Polishing Pad. Only 3-4 pea-sized drops of product are required per 18” x 18” area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, apply Menzerna Power Finish (RD3.02) with either a Lake Country 140 mm Rotary H-T Cutting Pad or a Lake Country 140 mm Rotary H-T Polishing Pad. Only 1-2 pea-sized drops of product are required per 18” x 18” area. You should work it thoroughly at 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.