Menzerna Super Finish (85RE)

Menzerna Super Finish (85RE) is one of the most regularly used finishing polishes in our studio. Why? Because its cut and gloss characteristics make it ideal for removing wash marring and faint swirl marks on all paint types. What’s more, its filler-free formula also makes it a great choice of finishing polish for refining out machine holograms after heavy compounding. Add into the equation the fact that it’s easy to use and produces relatively little dust, and it becomes a great all round polish that is hard to beat.

Menzerna Super Finish (85RE) is an ultra-fine abrasive polish designed to remove minor paint defects such as wash marring and faint swirl marks. It also nips out machine holograms with ease, making it a good choice of finishing polish for use after compounding. It works by using precision-milled aluminium oxide particles to burnish painted surfaces to perfection. High quality lubricants lengthen its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

You can use Menzerna Super Finish (85RE) by hand or machine, although for best results we recommend the latter. By hand, apply Menzerna Super Finish (85RE) with a Lake Country Light Cut Hand Pad. Only 1-2 pea-sized drops of product are required per 12” x 12” area. You should work it as firmly and evenly as possible until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a dual action polisher, apply Menzerna Super Finish (85RE) with either a Lake Country 140 mm Hydro-Tech Finishing Pad or a Menzerna 135 mm Finishing Pad. Only 3-4 pea-sized drops of product are required per 18” x 18” area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, apply Menzerna Super Finish (85RE) with a Lake Country 140 mm Rotary H-T Finishing Pad. Only 1-2 pea-sized drops of product are required per 18” x 18” area. You should work it thoroughly at 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.