BASKET   :   CHECKOUT
spacer
Feefo Gold Trusted Merchant 2016

Menzerna Medium Cut Polish 2200 (PO234)

Click image to see larger view

Heavily swirled ceramic nano-particle and scratch-resistant finishes can be quite difficult to correct, even if the paint defects don't appear to be very deep. Why? Because such paints are physically very hard, and normal abrasive polishes are rarely robust enough to cut them properly. Menzerna Medium Cut Polish 2200 (PO234) solves this problem by swapping out fragile aluminium oxide particles for robust precision-milled abrasives. These also work very well on conventional intermediate and hard paints without prematurely breaking down, meaning that you'll make progress in no time at all.
Menzerna Medium Cut Polish 2200 (PO234) is a medium cutting compound designed to remove moderate to severe paint defects, including swirl marks and light scratches. It's ideal for correction work on modern ceramic nano-particle and scratch-resistant clearcoats, and produces great results on intermediate and hard conventional paint finishes too. It works by using robust, precision-milled abrasives to cut away a very thin layer of paint. Long lasting lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.
You should only use Menzerna Medium Cut Polish 2200 (PO234) by machine. For best results using a dual action polisher, apply Menzerna Medium Cut Polish 2200 (PO234) with either a Lake Country 140 mm Hydro-Tech Cutting Pad or a Lake Country 140 mm Hydro-Tech Polishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, apply Menzerna Medium Cut Polish 2200 (PO234) with either a Lake Country 140 mm Rotary H-T Cutting Pad or a Lake Country 140 mm Rotary H-T Polishing Pad. Only 1-2 pea-sized drops of product are required per 18 x 18 area. You should work it thoroughly at 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.
Water-based:Yes
Suitable for hand use:No
Suitable for dual action polishers:Yes
Suitable for rotary polishers:Yes
Suitable for soft paints:No
Suitable for intermediate paints:Yes
Suitable for hard paints:Yes
Contains abrasive particles:Yes
Diminishing type abrasives:Yes
Contains chemical cleaners:No
Contains fillers and glazing oils:No
Cut level:Cut level 8/10
Gloss level:Gloss level 8/10
Medium Cut Polish 2200 (PO234) - 250 ml
10.00
In Stock
QUANTITY 
Request a price match (terms apply)
Medium Cut Polish 2200 (PO234) - 1 L
27.00
In Stock
QUANTITY 
Request a price match (terms apply)
View BasketCheckout Now
spacer
spacer