BASKET   :   CHECKOUT
spacer
Feefo Gold Trusted Merchant 2016

Menzerna Super Finish 3500 (PO106FA)

Click image to see larger view

Marred ceramic nano-particle and scratch-resistant finishes can be quite difficult to correct, even if the defects are light. Why? Because such paints are physically very hard, and normal abrasive polishes are rarely robust enough to cut them properly. Menzerna Super Finish 3500 (PO106FA) solves this problem by swapping out fragile aluminium oxide particles for robust precision-milled abrasives. These also work really well on conventional intermediate and hard paints without prematurely breaking down, meaning that you'll make progress in no time at all.
Menzerna Super Finish 3500 (PO106FA) is a coarse finishing polish designed to remove light to moderate paint defects. It is perfect for light correction work on modern ceramic nano-particle and scratch-resistant clearcoats, and produces great results on intermediate and hard conventional paint finishes too. It works by using robust, precision-milled abrasives to cut away a very thin layer of paint. Long lasting lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.
You can use Menzerna Super Finish 3500 (PO106FA) by hand or machine, although for best results we recommend the latter. By hand, apply Menzerna Super Finish 3500 (PO106FA) with either a Lake Country Hydro-Tech Polishing Hand Pad or a Lake Country Hydro-Tech Finishing Hand Pad. Only 1-2 pea-sized drops of product are required per 12 x 12 area. You should work it as firmly and evenly as possible until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a dual action polisher, apply Menzerna Super Finish 3500 (PO106FA) with either a Lake Country 140 mm Hydro-Tech Polishing Pad or a Lake Country 140 mm Hydro-Tech Finishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, apply Menzerna Super Finish 3500 (PO106FA) with either a Lake Country 140 mm Rotary H-T Polishing Pad or a Lake Country 140 mm Rotary H-T Finishing Pad. Only 1-2 pea-sized drops of product are required per 18 x 18 area. You should work it thoroughly at 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.
Water-based:Yes
Suitable for hand use:Yes
Suitable for dual action polishers:Yes
Suitable for rotary polishers:Yes
Suitable for soft paints:No
Suitable for intermediate paints:Yes
Suitable for hard paints:Yes
Contains abrasive particles:Yes
Diminishing type abrasives:Yes
Contains chemical cleaners:No
Contains fillers and glazing oils:No
Cut level:Cut level 4/10
Gloss level:Gloss level 10/10
Super Finish 3500 (PO106FA) - 250 ml
10.00
In Stock
QUANTITY 
Request a price match (terms apply)
Super Finish 3500 (PO106FA) - 1 L
27.00
In Stock
QUANTITY 
Request a price match (terms apply)
View BasketCheckout Now
spacer
spacer