GYEON Q2M TAR is another must have product from the growing GYEON range, and complements Q2M IRON and Q2M Clay for routine coating-safe decontamination duties. Every bit as good as its professionally orientated rivals, GYEON Q2M TAR is an essential product for use in between washing and claying, as it quickly dissolves even the toughest tar deposits, which greatly reduces the need for intensive claying. While it's free-rinsing formula prevents unsightly white stains from forming, care should be taken to avoid using it on freshly painted surfaces, as it does have the potential to dissolve uncured paint. In short, as long as it's used with care, GYEON Q2M TAR is an essential time-saving product, and is perfectly suited to the needs of enthusiasts and professionals alike.
GYEON Q2M TAR is a d-Limonene-based tar remover that quickly and easily removes bonded organic contaminants from all exterior vehicle surfaces. In addition to being a time saver, it also reduces the risk of causing surface marring during the subsequent claying stage (which may still be required for inorganic contaminant removal), as there is far less chance of large particles of organic debris becoming trapped between the clay bar and the paint and then being moved around. The only time caution is required is when fresh paint has been applied and has not been cured, i.e. in the period straight after a SMART repair is performed. In such cases, the use of GYEON Q2M TAR should be avoided as, being a strong organic solvent, it does have the potential to dissolve uncured paint.
GYEON Q2M TAR is d-Limonene-based and should thus be used neat. For best results, wash and rinse your car as usual and then, working on one panel at a time, spray it on liberally and allow 2-3 minutes for it to work (we recommend working out of direct sunlight, as it must not be allowed to dry out). Then take a PB Disposable Towel and wipe the panel down gently to remove any stubborn nibs of tar or honeydew, etc. Finally, rinse the panel down thoroughly with an open ended hose before moving on to the next panel. Once the whole car is done, discard the towel (don't try and wash it, because it will stink out your washing machine), rinse the whole car once more and then proceed to use GYEON Q2M IRON and GYEON Q2M Clay to remove inorganic contaminants.
|Strips sealants and waxes:|
|Removes organic contaminants:|
|Safe for all wheel types:|