Gyeon Q²M Cure Matte is an easy to use hydrophobic spray sealant that banishes the usual problem associated with trying to maintain a matt-specific quartz coating, namely water spotting. It does this by laying down a slick layer of SiO2-fortified polymers, which seals off the underlying coating against waterborne minerals and enhances its appearance. Gyeon Q²M Cure Matte can be applied to wet or dry surfaces equally well, and the incremental addition of these SiO2-fortified polymers over time not only makes routine washing and drying easier, but also prolongs the life of the underlying coating almost indefinitely.
Gyeon Q²M Cure Matte is a silica-based quick detailing spray for matt-specific quartz coatings, and is designed to be applied to wet or dry surfaces straight after routine washing. By depositing an ultra-slick layer of SiO2-rich polymers, Gyeon Q²M Cure Matte enhances hydrophobicity and imparts strong anti-static properties. In addition, it also reduces the mineral affinity of freshly applied quartz coatings and thus eliminates the risk of water spots forming as they continue to cure. Gyeon Q²M Cure Matte has a surprisingly long lifespan of up two months, meaning it can also be used to temporarily protect bare matt finishes.
For best results, lightly mist Gyeon Q²M Cure Matte over a single panel at a time (wet or dry), and immediately wipe the panel down to spread a thin, even film of product using either a PB Luxury Drying Towel (wet) or a PB Luxury Buffing Towel (dry). Then refold your towel, and buff the panel down carefully to fully remove the film and reveal a uniform streak-free finish. Alternatively, on dry surfaces, you may wish spread a thin film of product over each panel using a Meguiar's Even Coat Microfiber Applicator Pad before buffing it off with a PB Luxury Buffing Towel. This latter method ensures more even coverage.
|Suitable as a clay lubricant:|