Gyeon Q²M Cure is an easy to use hydrophobic spray sealant that banishes the usual problem associated with trying to maintain fresh quartz coatings, namely water spotting. It does this by laying down a slick layer of SiO2-fortified polymers, which seals off the underlying coating against waterborne minerals and enhances its appearance. Gyeon Q²M Cure can be applied to wet or dry surfaces equally well, and the incremental addition of these SiO2-fortified polymers over time not only makes routine washing and drying easier, but also prolongs the life of the underlying coatings almost indefinitely.
Gyeon Q²M Cure is a silica-based quick detailing spray for quartz coatings, and is designed to be applied to wet or dry surfaces straight after routine washing. By depositing an ultra-slick layer of SiO2-rich polymers, Gyeon Q²M Cure enhances gloss, boosts hydrophobicity and imparts strong anti-static properties. In addition, it also reduces the mineral affinity of freshly applied quartz coatings and thus eliminates the risk of water spots forming as they continue to cure. Gyeon Q²M Cure has a surprisingly long lifespan of up two months, meaning it can also be used to temporarily protect bare finishes.
For best results, lightly mist Gyeon Q²M Cure over a single panel at a time (wet or dry), and immediately wipe the panel down to spread a thin, even film of product using either a PB Luxury Drying Towel (wet) or a PB Luxury Buffing Towel (dry). Then refold your towel, and buff the panel down carefully to fully remove the film and reveal an intense streak-free shine. Alternatively, on dry surfaces, you may wish spread a thin film of product over each panel using a Meguiar's Even Coat Microfiber Applicator Pad before buffing it off with a PB Luxury Buffing Towel. This latter method ensures more even coverage.
|Suitable as a clay lubricant:|