GYEON Q2 FABRICCOAT is an advanced silica-based coating for modern automotive textiles that lays down an invisible and highly hydrophobic barrier that repels liquids and soiling. Able to withstand mechanical wear for upwards of six months at a time and virtually impervious to liquids and grime, it pays for itself in terms of the benefits it offers. Just think: (i) no more drink spillage disasters when children are in your car (just a simple mopping up job instead), and; (ii) no more continually damp, musty smelling floor mats during the winter months. It also works a treat on fabric convertible tops too, and reduces the need for regular maintenance.
GYEON Q2 FABRICCOAT is a functional silica-based coating that forms a semi-permanent water and grime repellent barrier on all modern automotive textiles, both inside and out. It uses the latest in low volatile content silicon (Si) technology to lay down a film of dimethylsiloxane polymers that condense rapidly to form a highly flexible SiO2 coating that bonds to fabrics at the molecular level. Following application, treated surfaces become hydrophobic and thus virtually impervious to liquids and grime. In addition, this coating also blocks out UV radiation from the sun, and thus helps to prevent automotive textiles from fading over time.
GYEON Q2 FABRICCOAT should be applied in a warm, dry, well-ventilated environment out of direct sunlight. Users should wear PB Nitrile gloves, and should be careful to avoid inhaling the product during the application process. Surfaces to be treated with GYEON Q2 FABRICCOAT should be spotlessly clean and dry prior to starting the application process. If any pre-treatment cleaning is required, a dedicated fabric cleaner should be used and the treated surfaces then left to dry naturally.
GYEON Q2 FABRICCOAT should be sprayed on evenly and then left for half an hour to cure. Once dry, a further application should be made to ensure that maximum protection is achieved. Any overspray onto adjacent surfaces should be wiped away immediately with a PB Utility Towel. In order to get the best performance and quoted durability from the resulting finish, allow it to cure for a further 12 hours before using your car or exposing the treated surfaces to the elements.
|Suitable for interior use:|
|Suitable for exterior use:|
|Safe for delicate materials:|
|Emits strong fumes:|
|Durability:||6 months +|