Spotlessly clean wheels right through to the back always make a car stand out, but maintaining them to this standard is not always easy, particularly if they feature a complicated design. In cases where access to inner rims is made difficult, either due to narrow spoke gaps or the presence of dinner plate-sized brake discs and calipers, EZ Detail Wheel Brushes are a godsend. Despite the generous diameter of the brushes, the soft bristles are highly flexible and able to flatten down almost fully to enable access through the narrowest of gaps safely and effectively. The generous length of the bristles also ensures that spoke-backs are properly cleaned as the brushes are withdrawn from inner rim areas, although this does result in a fair degree of splatter. As a result, it pays to stand over the wheel being cleaned rather than squatting in front of it when using these brushes; don't say we didn't warn you! In summary, EZ Detail Wheel Brushes are essential accessory products in our line up, and come in two handy sizes.
EZ Detail Wheel Brushes are ideal for cleaning complex wheel designs where access between spokes and to the inner rim itself is severely restricted. Each EZ Detail Wheel Brush features feathered Nylex bristles that are extremely soft and flexible, meaning that they are able to flatten down almost completely and access extremely narrow gaps safely and effectively. These bristles are also chemically resistant and feature a memory design, meaning that the intended shape of each brush can be restored at any point by soaking it in hot water. The main vinyl-covered wire stem of each EZ Detail Wheel Brush is highly flexible, and can be safely bent to any angle to afford greater access to spoke-backs. The tip of the stem is also covered in vinyl to prevent any accidental scratching, and a rubber knuckle guard sits atop the ergonomically-shaped wooden handle in order to protect your hands as you reach into the backs of deep-dish wheels. Two sizes of EZ Detail Wheel Brush are currently available, to ensure maximum versatility.
Care instructions: (i) rinse out frequently during and after each use, in order to keep the bristles free of grit and other debris; (ii) avoid bending the main stem over and over again on a regular basis, otherwise it will snap prematurely; (iii) hanging up while not in use, so as to ensure that the brush keeps its intended shape; and (iv) restore bent or flattened bristles by standing the brush in a bucket of hot water for a couple of minutes - this will trigger the memory design of the bristles, causing them to magically return to their correct position (this process can be repeated as often as necessary to restore the intended shape of the brush, although storing it properly will pretty much guarantee it remains in tip top condition).
|Construction:||Nylex bristles, vinyl-covered wire stem, wooden handle|
|Dimensions:||ø 60 mm x 330 mm (small)|
ø 105 mm x 450 mm (large)