Blackfire Midnight Sun Kit

If ever you have had the pleasure of travelling in the arctic during the summer months, you will know that the quality of light during the night is amazing. As the sun dips to just above the horizon at around midnight, the landscape lights up in a fiery glow that has unbelievable clarity. Quite apt then that Blackfire selected the midnight sun theme as the name for their best wax ever, as it does a similar thing to automotive paint and is absolutely stunning. The foundation stone of the midnight sun finish is an initial application of Blackfire Gloss Enhancing Polish, which masks minor paint defects (such as wash marring and fine swirl marks) and dramatically enhances surface gloss in order to create the illusion that the paint is dripping wet. We recommend using this combined finishing polish and glaze at least twice a year, as it provides a perfect base for the magic, which is then provided by multiple coats of Blackfire Midnight Sun Paste Wax.

Packed full of high quality Brazilian No.1 carnauba, Blackfire Midnight Sun Paste Wax is further fortified with gloss enhancing oils and crystal super-polymers and adds rippling liquidity and intense depth to the finish. Incredibly easy to apply and buff off, it delivers a jaw dropping finish characterised by superb reflectivity, excellent flake pop and a liquid-like level of glossiness that is almost surreal. Maintenance of the wet ice over fire shine is easily performed using Blackfire Deep Gloss Spray Sealant. This quick detailing spray contains the same crystal super-polymers used in the rest of the system and can be used repeatedly to enhance gloss and extend protection without any fear of causing hazing or streaking. In fact, regular use is recommended, as it will greatly enhance surface slickness, making washing and drying even easier and prolonging the life of the underlying protective sealant and wax layers indefinitely.

Step 1 – Blackfire Gloss Enhancing Polish

Blackfire Gloss Enhancing Polish should be applied to freshly clayed paint using the supplied Meguiar’s Microfibre Applicator Pad. Only 3-4 pea-sized drops of product are required per panel and these should be wiped in as thinly and evenly as possible to produce a film that should then be allowed to dry for up to 15 minutes. Once hazed over, this film should then be buffed off carefully using the supplied PB Super Buffing Towel.

Step 2 – Blackfire Midnight Sun Paste Wax

Blackfire Midnight Sun Paste Wax should be applied to three to four panels at a time and as thinly and evenly as possible using the supplied Blackfire Ultimate Applicator Pad. The resulting film should then be buffed off within 5-10 minutes of application using one of the supplied Poorboy’s Deluxe Mega Towels; there is absolutely no need to allow the film to dry fully before it is removed (if you do, you will find that is more difficult to remove).

Step 3 – Blackfire Deep Gloss Spray Sealant

Lightly mist Blackfire Deep Gloss Spray Sealant over a single panel at a time, and immediately wipe the panel down to spread a thin, even film of product using one of the supplied Poorboy’s Deluxe Mega Towels. Then refold your towel, and buff the panel down carefully to fully remove the film and reveal an intense streak-free shine.

Care instructions for applicators and towels

(i) wash after each use in a washing machine at a low temperature (40 °C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment whilst not in use (lidded plastic storage boxes are ideal in this respect).

Due to the complexity of this kit we are unable to provide a meaningful summary specification. Please see the product pages linked in the ‘Description’ tab for individual product specifications.