BASKET   :   CHECKOUT
spacer
Feefo Gold Trusted Service 2017

Blackfire Gloss Enhancing Polish

Click image to see larger view

Blackfire Gloss Enhancing Polish is without any doubt one of the best paint preparation products currently on the market, and kills two birds with one stone. Firstly, it deeps cleans painted surfaces, flushing out deep-seated grime and stripping away old protective residues. Secondly, it lays down fillers and heavy gloss enhancing agents that mask minor defects and impart an insanely wet-looking finish. So wet in fact, that you'd almost swear blind you could reach down into it. In summary, Blackfire Gloss Enhancing Polish is an excellent product that effortlessly transforms the appearance of paint and prepares it perfectly for the addition of sealant or wax protection.
Blackfire Gloss Enhancing Polish is a non-abrasive paint cleaner and glaze that does away with the need for separate cleansing and glazing steps. It is designed to mask minor defects (such as wash marring and fine swirl marks) and dramatically enhance gloss in order to create the illusion that paint is dripping wet ahead of an application of sealant or wax protection. During the application process, potent chemical cleaners strip away residual grime and old layers of protection, while kaolin clay particles and other glazing agents visually reduce the extent of wash marring and minor swirl marks by filling such defects and robbing sunlight of sharp edges to reflect off of.
Blackfire Gloss Enhancing Polish can be applied equally well by hand or dual action machine. By hand, it should be applied to freshly decontaminated paint one panel at a time using a Meguiar's Microfibre Applicator Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be worked in well in an overlapping fashion until only a thin film remains. The film should then be buffed off immediately using a PB Super Buffing Towel. By dual action polisher, Blackfire Gloss Enhancing Polish should be applied using a Lake Country Hydro-Tech Finishing Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be worked in thoroughly at around 3000-4000 orbits per minute (speed 3-4 on most dual action machine polishers) until only a thin film remains. This film should then be buffed off immediately using a PB Super Buffing Towel.
Water-based:Yes
Enhances gloss:Yes
Suitable for hand use:Yes
Suitable for dual action polishers:Yes
Suitable for rotary polishers:No
Contains abrasive particles:No
Contains chemical cleaners:Yes
Contains fillers and glazing oils:Yes
Cleaning strength:Cleaning strength 3/5
Filling power:Filling power 3/5
Gloss Enhancing Polish - 473 ml
18.50
In Stock
QUANTITY 
Request a price match (terms apply)
View BasketCheckout Now
spacer
spacer