The Blackfire BlackICE Whiplash Kit is designed to do one thing; create a shine so deep on dark coloured cars that it turns heads fast enough to cause whiplash! It achieves this using a very special colour-charging wax that features a hybrid blend of gloss-enhancing Brazilian carnauba wax, colour-enhancing German montan wax and fortifying German crystal super-polymers. This unique wax was obsessively developed over a period of twenty three months, and represents the state of the art in colour-charging technology. The foundation stone of the whiplash inducing BlackICE finish is an initial application of Blackfire Gloss Enhancing Polish, which masks minor paint defects (such as wash marring and fine swirl marks) and dramatically enhances surface gloss in order to create the illusion that the paint is dripping wet. We recommend using this combined finishing polish and glaze at least twice a year, as it provides a perfect base for the magic, which is then provided by multiple coats of Blackfire BlackICE Hybrid Montan Sealant Wax.
Packed full of high quality Brazilian carnauba wax and German montan wax, Blackfire BlackICE Hybrid Montan Sealant Wax is further fortified with colour-charging components and crystal super-polymers, and adds rippling liquidity and intense depth to the finish. Incredibly easy to apply and buff off, it delivers a mind blowing finish characterised by a level of depth and gloss that is bordering on the ridiculous; in strong, direct sunlight a degree of shimmer is actually noticeable on dark coloured paints. Maintenance of the whiplash inducing BlackICE finish is easily performed using Blackfire Midnight Sun Instant Detailer. This quick detailing spray contains the same high quality carnauba and crystal super-polymers used in the rest of the system and can be used repeatedly to enhance gloss and extend protection without any fear of causing hazing or streaking. In fact, regular use is recommended, as it will greatly enhance surface slickness, making washing and drying even easier and prolonging the life of the underlying wax layers indefinitely.
Step 1 – Blackfire Gloss Enhancing Polish
Blackfire Gloss Enhancing Polish should be applied to freshly clayed paint using the supplied Meguiar’s Microfibre Applicator Pad. Only 3-4 pea-sized drops of product are required per panel and these should be wiped in as thinly and evenly as possible using light downward pressure. The resulting film should be buffed off immediately using the supplied PB Super Buffing Towel.
Step 2 – Blackfire BlackICE Hybrid Montan Sealant Wax
Blackfire BlackICE Hybrid Montan Sealant Wax should be applied to three to four panels at a time and as thinly and evenly as possible using the supplied Blackfire Wax Applicator Pad. The resulting film should then be buffed off within 5-10 minutes of application using the supplied PB Deluxe Buffing Towel; there is absolutely no need to allow the film to dry fully before it is removed (if you do, you will find that is more difficult to remove).
Step 3 – Blackfire Midnight Sun Instant Detailer
Lightly mist Blackfire Midnight Sun Instant Detailer over a single panel at a time, and immediately wipe the panel down to spread a thin, even film of product using the supplied PB Luxury Buffing Towel. Then refold your towel, and buff the panel down carefully to fully remove the film and reveal an intense streak-free shine.
Care instructions for applicators and towels
(i) wash after each use in a washing machine at a low temperature (40 °C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment whilst not in use (lidded plastic storage boxes are ideal in this respect).
Due to the complexity of this kit we are unable to provide a meaningful summary specification. Please see the product pages linked in the ‘Description’ tab for individual product specifications.