This durable Auto Finesse wax kit provides everything you need to prepare, protect and maintain your paint properly, and is ideal for daily drivers and winter use. As its name suggests, Auto Finesse Fusion blends synthetic gloss enhancing polymers and high quality carnauba wax to give a hybrid formula with very different characteristics compared to the other waxes in the Auto Finesse line up. For starters, it imparts a sharp looking shine rather than a wet looking gloss, albeit with a touch more warmth than traditional sealants. Furthermore, its hybrid nature offers more durability than most straight waxes, making it ideal for the demands imposed by daily drivers and winter use. If you value durability above all else but still want to achieve an outstanding looking finish, Auto Finesse Fusion is perfect for you.
Step 1 – Auto Finesse Tripple
Auto Finesse Tripple should be applied to freshly clayed paint using the supplied Meguiar’s Microfibre Applicator Pad. Only 3-4 pea-sized drops of product are required per panel and these should be wiped in as thinly and evenly as possible to produce a film that should then be allowed to dry for up to 15 minutes. Once hazed over, this film should then be buffed off carefully using the supplied PB Super Buffing Towel.
Step 2 – Auto Finesse Fusion
Auto Finesse Fusion should be applied to three to four panels at a time and as thinly and evenly as possible using the supplied Auto Finesse Waxmate XL. The resulting film should then be buffed off within ten minutes of application using the supplied PB Deluxe Buffing Towel; there is no need to allow it to dry for any longer before it is removed (if you do, you will likely find it more difficult to remove).
Step 3 – Auto Finesse Finale
Lightly mist Auto Finesse Finale over a single panel at a time and immediately wipe the panel down to spread a thin, even film of product using the supplied PB Luxury Buffing Towel. Then refold your towel and buff the panel down carefully to fully remove the film and reveal an intense streak-free shine.
Care instructions for applicators and towels
(i) wash after each use in a washing machine at a low temperature (40 °C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment whilst not in use (lidded plastic storage boxes are ideal in this respect).
Due to the complexity of this kit we are unable to provide a meaningful summary specification. Please see the product pages linked in the ‘Description’ tab for individual product specifications.