To achieve the best possible finish, we've always believed that last step products should be applied by hand using a good quality applicator pad. While this remains the case for waxes and coatings, our opinion has changed with respect to sealants containing heat-activated polymers, as their formulas rely on friction and thus work best when applied by machine. Auto Finesse Power Seal is one such product, and the Auto Finesse Supreme Pad is the perfect pad for applying it.
The Auto Finesse 160 mm Supreme Pad is made from an ultra-soft finishing foam, and is the perfect choice for applying Auto Finesse Power Seal. The foam used is thermally reticulated, with a final cell count of 90 pores per inch, while the recessed hook and loop fastening material is perfectly sized to accept 125 mm backing plates. Regardless of your experience, this pad will enable you to get the best possible results from Auto Finesse Power Seal.
General usage notes: (i) always select the least aggressive pad you think you will need to achieve the desired result, and step up one grade at a time if more cut is required (ii) always ensure that you centre each pad properly on the backing plate (this can take several attempts to get right, but is vital if the machine is to remain perfectly balanced during use); (iii) always use an appropriate sized pad for the backing plate you are using (the pad should always protrude past the edge of the backing plate, never the other way around); (iv) always ensure that excess polish residue on the face of the pad is brushed off regularly during use using a PB Utility Brush (failure to follow this advice can lead to micromarring of the finish, so don't be lazy!); (v) after use, soak each pad in a bucket of Lake Country Snappy Clean Boost solution for 15 minutes and then rinse under fresh running water (using your fingertips to massage out any remaining polish residue) and allow to dry naturally, and; (vi) while not in use, store in a dry, dust-free environment (lidded plastic storage boxes are ideal in this respect).
|Construction:||Flexible polyurethane foam|
|Dimensions:||ø 160 mm x 30 mm|
|Recommended backing plate size:||ø 125 mm|
|Suitable for dual action polishers:|
|Suitable for rotary polishers:|
|Suitable for soft paints:|
|Suitable for intermediate paints:|
|Suitable for hard paints:|