BASKET   :   CHECKOUT
spacer
Feefo Gold Trusted Merchant 2016

3M Ultrafina SE

Click image to see larger view

Although 3M Ultrafina SE was originally designed specifically for use on modern ceramic nano-particle and scratch-resistant clearcoats, it has since proven itself to be ideal for use on conventional clearcoats in situations where low levels of cut and maximum gloss enhancement are required. Comprising a unique blend of precision-milled diminishing micro-abrasives, 3M Ultrafina SE offers distinct advantages in terms of finish quality and work time, and performs equally well whether used in conjunction with dual action or rotary polishers, making it ideal for both home and professional use.
3M Ultrafine SE is a fast acting ultra-fine liquid abrasive that is designed to permanently remove minor paint defects such as such as faint swirl marks, polishing holograms and wash marring from original and refinished paintwork and leave a superior high gloss finish ready for the addition of sealant or wax protection. Gloss is maximised by burnishing surfaces to a micro-smooth highly reflective finish using micro-fine, precision-milled aluminium oxide particles suspended in a base of lubricating oils. Unlike many other polishes, this product contains no fillers, meaning that defect removal is permanent rather than temporary.
3M Ultrafina SE should only be applied by machine. For best results using a dual action polisher, it should be applied to freshly compounded paint using a 3M 150 mm Finishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area, and these should be worked in thoroughly at around 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only a thin film remains. This film should then be buffed off carefully using a PB Super Buffing Towel. For best results using a rotary polisher, 3M Ultrafina SE should be applied to freshly clayed paint using a 3M 150 mm Finishing Pad. Only 1-2 pea-sized drops of product are required per 18 x 18 area, and these should be worked in thoroughly at around 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only a thin film remains. This film should then be buffed off carefully using a PB Super Buffing Towel.
Water-based:Yes
Suitable for hand use:No
Suitable for dual action polishers:Yes
Suitable for rotary polishers:Yes
Suitable for soft paints:Yes
Suitable for intermediate paints:Yes
Suitable for hard paints:Yes
Contains abrasive particles:Yes
Diminishing type abrasives:Yes
Contains chemical cleaners:No
Contains fillers and glazing oils:No
Cut level:Cut level 2/10
Gloss level:Gloss level 10/10
Ultrafina SE - 1 L
35.00
In Stock
QUANTITY 
Request a price match (terms apply)
View BasketCheckout Now
spacer
spacer