BASKET   :   CHECKOUT
spacer
Feefo Gold Trusted Merchant 2016

3M Glass Polishing Compound

Click image to see larger view

Polishing marring and fine scratches out of glass surfaces is a slow, difficult and painful process at the best of times, but using the right products and accessories for the job does make life just that little bit easier. 3M Glass Polishing Compound is ideal in this respect as it not only cuts really well, but also breaks down quickly and completely during use to leave a high clarity finish that requires no further refinement, making it a true one step glass polishing product.
3M Glass Polishing Compound comprises a precision-milled cerium oxide-based micro-abrasive paste that permanently removes defects such as swirl marks, fine scratches and water spots from exterior glass surfaces. The use of cerium-oxide offers distinct advantages in terms of finish quality and work time, and makes it ideal for use with both dual action and rotary machine polishers, making it safe for both enthusiasts and professional alike.
3M Glass Polishing Compound should only be applied by machine; it will yield little or no improvement if you apply it by hand. For best results using a dual action polisher, it should be applied to freshly clayed glass using Flexipads Rayon Glass Polishing Discs. Only 3-4 pea-sized drops of product are required per 12 x 12 area, and these should be worked in thoroughly at around 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only a thin film remains (the working surface should be misted with water regularly during the polishing process, in order to help keep it cool). The residue should be buffed off carefully using a PB Utility Towel.

For best results using a rotary polisher, 3M Glass Polishing Compound should be applied to freshly clayed glass using Flexipads Rayon Glass Polishing Discs. Only 1-2 pea-sized drops of product are required per 12 x 12 area, and these should be worked in thoroughly at around 900-1200 revolutions per minute (speed 2-3 on most rotary machine polishers) until only a thin film remains. Higher machine speeds should be avoided, due to risk of overheating (which can distort modern glass laminates), and the working surface should be misted with water regularly during the polishing process in order to help keep it cool. The residue should be buffed off carefully using a PB Utility Towel.
Water-based:Yes
Suitable for interior use:No
Suitable for exterior use:Yes
Suitable for hand use:No
Suitable for dual action polishers:Yes
Suitable for rotary polishers:Yes
Contains abrasive particles:Yes
Diminishing type abrasives:Yes
Contains chemical cleaners:No
Contains fillers and glazing oils:No
Cut level:Cut level 5/10
Gloss level:Gloss level 10/10
Glass Polishing Compound - 1 L
33.00
In Stock
QUANTITY 
Request a price match (terms apply)
View BasketCheckout Now
spacer
spacer